NYC Universal Affordability Preference (UAP): The City of Yes Density Bonus, Explained

Short answer: The Universal Affordability Preference (UAP) is a City of Yes rule that lets you build roughly 20% more floor area than your zoning normally allows in medium- and high-density residential districts, as long as that extra space is permanently affordable housing. It is granted as-of-right (no special approval or rezoning) and it replaced the city's old Voluntary Inclusionary Housing bonus.

What UAP actually does

Every residential zoning district has a floor area ratio (FAR) that caps how much building you can put on a lot. UAP gives you a bonus on top of that cap. In exchange for the extra floor area, that added space has to be permanently affordable. It is "universal" because it works across most medium- and high-density residential districts (roughly R6 and up), not just a few special areas, and it is a "preference" because the city is deliberately encouraging this trade-off.

The bonus is tied directly to the affordable housing you provide. In practice it lets a project add up to about 20% more floor area, and the extra counts only if it is permanently affordable. So it is not a free density increase. It is a swap: more building in return for income-restricted apartments that stay affordable for the life of the building.

Who the affordable units are for

The affordability rules are the heart of UAP, and these are the numbers that are fixed in the Zoning Resolution:

  • The affordable units must, on average, serve households earning 60% of the area median income (AMI).
  • A project may use no more than three income bands, and no single band may be set above 100% of AMI.
  • If a development has 10,000 square feet or more of affordable floor area, at least 20% of that affordable area must be set at an average of 40% of AMI (the deeper-affordability requirement).
  • The units can be rentals or for-sale homes, and the affordability is permanent.

Where UAP applies (and where it doesn't)

UAP is aimed at medium- and high-density residential districts. It does not apply to the lowest-density zones (the R1 through R5 "house" districts), which have their own separate City of Yes changes. Because the exact bonus FAR is different for every district, the smartest move is to confirm your own district first and then look up both your base FAR and your UAP FAR, rather than assuming a single number. If you don't know your district yet, start there.

How UAP relates to Mandatory Inclusionary Housing (MIH)

These two programs are easy to confuse. MIH is mandatory and is tied to specific areas the city has mapped, usually after a rezoning. UAP is the voluntary, citywide option you can use outside those mapped MIH areas. UAP replaced the older Voluntary Inclusionary Housing (VIH) program, so if you have seen references to VIH bonuses in older guides, UAP is the current version.

Is it really as-of-right?

The zoning bonus itself is designed to be available as-of-right, meaning you are not applying to the City Planning Commission or the BSA for a discretionary approval just to use it. The affordability piece is administered by the Department of Housing Preservation and Development (HPD), which sets the rules for unit mix, marketing, and the affordable-housing lottery. So the FAR comes from zoning, and the affordability compliance runs through HPD.

Why it matters for your project

If you own or are evaluating a site in a medium- or high-density residential district, UAP can meaningfully change the math on what is buildable, because 20% more floor area is a large swing. The trade-off is that the extra space is permanently affordable, so it only pencils out for certain projects. The first step is always confirming your district and base FAR, then seeing whether the UAP bonus is available and worth it for your goals.

Try it yourself

Zohgo can tell you your zoning district, your likely FAR, and whether City of Yes rules like UAP are in play for a specific address, all in plain English. Try Zohgo free at zohgo.ai.

This article is general information about NYC zoning, not legal or professional advice. Zoning rules change and every property is different. Confirm specifics for your property with the current Zoning Resolution and a licensed professional before making decisions.

Comments

Popular posts from this blog

How to Find Your Zoning District for Any NYC Address (Free)

What Can You Build on Your NYC Lot? A Plain-English Guide

How Many Units Can You Add to Your NYC Home Under City of Yes?